Message | Meaning/Remedy |
GROUP FULL | • You tried to create a 256th group on a disc used in |
| group on a disc used in MD mode. |
| , You can create only up to 255 groups (on a disc used in |
| or 99 groups (on a disc used in MD mode) on a disc. Keep the group |
| number within 255 or 99. |
|
|
HOLD | • The recorder is locked. |
| , Slide HOLD against the arrow to unlock the recorder (page 18). |
|
|
IN MENU | • You pressed a key on the remote control while selecting a menu on the |
| recorder. |
|
|
LOW BATTERY | • Batteries are weak. |
| , Charge the rechargeable battery or replace the dry battery (page 17). |
|
|
MEMORY OVER | • You tried to record with the recorder placed where it receives continuous |
| vibration. |
| , Put the recorder on a stable place, and start recording again. |
|
|
NO | • You selected bookmark play without setting bookmarks. |
BOOKMARKED | , Set bookmarks (page 41). |
TRACK |
|
|
|
NO DIGITAL | • You tried to make a copy from a disc that is protected by the Serial Copy |
COPY | Management System. You cannot make copies from a digitally connected |
| source which was itself recorded using digital connection. |
| , Use analog connection instead (page 34). |
|
|
NO DISC | • You tried to play or record with no disc in the recorder. |
| , Insert a disc. |
|
|
NO DISC | • You tried to erase a setting in the Disc Memory on a disc that contains no |
MEMORY | settings in the Disc Memory (page 58). |
|
|
NO FILE | • While viewing the file list, you selected a folder that have no folders or |
| files |
|
|
NO GROUP | • You selected “Group Erase” with a disc without group setting. |
| , You cannot erase groups with a disc with no groups. |
| • You tried to release a group setting with a disc that has no groups. |
| , Insert a disc with group settings. |
|
|
NO INPUT | • The recorder could not detect digital input signals. |
SIGNAL | , Make sure that the source is connected firmly (page 21). |
|
|
NON GROUPED | • You selected “Group Move” or “Group Erase”, or you tried to label a |
TRACK | group while selecting a track that does not belong to a group. |
| , Select a track within a group you want to edit, and then do the editing |
| operation again. |
|
|
NOT ENOUGH | • You tried to edit the contents of a 1GB |
POWER TO | battery power for editing (page 75). |
EDIT | , Connect the AC power adaptor to the recorder or insert a fully charged |
| rechargeable battery or a new alkaline dry battery. |
|
|
NOT ENOUGH | • You tried to record on a 1GB |
POWER TO REC | for recording (page 72). |
,Connect the AC power adaptor to the recorder or insert a fully charged rechargeable battery or a new alkaline dry battery.
81