Functions1) | Operations |
To move the cursor | Turn the jog dial. |
up or down |
|
|
|
To enter a letter. | Press the jog dial |
| (N/ENT). |
|
|
To insert a blank | Press VOL +. |
space. |
|
|
|
To delete a letter. | Press VOL |
|
|
To move the cursor | Press x. |
from the character |
|
palette to the letter |
|
input area. |
|
|
|
To switch between | Press X. |
capital letters and |
|
small letters. |
|
|
|
1)Functions of the buttons or the control may differ depending on when the cursor is in the letter input area or in the character palette.
5 Repeat step 4, and then enter all characters of the label name.
6 Press the jog dial for 2 seconds or more to enter the title.
You can change the titles by doing the procedure for “Labeling” (page 48).
Notes
•The recorder is able to display, but cannot label using Japanese “Katakana” characters.
•The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device (in MD mode only).
With this function, you can assign existing tracks or groups to a new group, and also you can assign a track that currently belongs to no group to an existing group.
You can create a maximum of 255 groups on a disc used in
Disc
Track number
Group 1 | Group 2 |
1 2 3 4 5 6 7 8 9 101112
Assigning tracks 1 to 3 to a new group
Assigning group 1 and group 2 to a new group
Disc
Group 1 | Group 2 |
1 2 3 4 5 6 7 8 9 101112
Registration of
It is not possible to make a new group if the first track or last track of the group has been selected from the middle of an existing group.
Track numbers appear according to their order on the disc, not their order within the group.
49