Example of Calculation:

Item No.

Parameter

 

Result

 

 

Decimal

Hexadecimal

 

 

 

 

 

 

 

 

0211

Pr_nominal

2.48 mW

50

32h

 

 

 

 

 

0212

Kr

−0.3 %/°C

30

1Eh

 

 

 

 

 

0213

Pw_nominal

7.35 mW

147

93h

 

 

 

 

 

0214

Kw

−0.4 %/°C

40

28h

 

 

 

 

 

0215

Prmin

1.9 mW

38

26h

 

 

 

 

 

0216

Pwmin

5.8 mW

116

74h

 

 

 

 

 

Procedure:

1.Enter the test mode (Display Check mode).

2.Press the [VOL+] key to enter the Manual mode.

3.Press the > key once, press the [VOL+] key once, and press the > key once again to display as follows.

Display of the remote commander

210DiscPr

4.Press the > key once to select the item number 0211.

5.Adjust with [VOL+]/[VOL--]keys so that the adjustment value of LCD becomes calculated value.

6. Press the X key on the set or

–

key on the remote

commander to write the adjusted value.

7.Press the > key to next item.

8.Repeat adjustment from step 4 until item number 0216.

3-5-2. Destination setting

Procedure:

1.Enter the test mode (Display Check mode).

2.Press the [VOL+] key to enter the Manual mode.

3.Press the > key five time to select the item number 0113 and display as follows.

Display of the remote commander

113 DistFL **

adjustment value (hexadecimal)

4.Press the [VOL+]/[VOL--]key and set the according value to each destination referring to the following table.

5.Press the X key on the set or – key on the remote commander to write the adjusted value.

6.Press the > key to select the item number 0114.

7.Repeat adjustment from step 3.

8.Press the x key four times and back to the Display Check mode.

Destination

Setting value

 

 

 

Item No. 0113

Item No. 0114

 

 

 

US, Canadian, E, Mexican,

 

 

Hong Kong, Korean, Australian and

20

80

Tourist

 

 

 

 

 

AEP, UK and East European

A0

80

Table 3-5-2. Destination Setting

MZ-RH910

3-5-3. Other setting

Procedure:

1.Enter the test mode (Display Check mode).

2.Press the [VOL+] key to enter the Manual mode.

3.Press the [VOL+] key once and press the > key five time to select the item number 1113 and display as follows.

Display of the remote commander

113SS**$$##

adjustment value (hexadecimal)

4.Adjust with [VOL+]/[VOL--]keys so that the adjustment value of “**” on the LCD becomes “1A”.

5. Press the X key on the set or – key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD)

6.Adjust with [VOL+]/[VOL--]keys so that the adjustment value of “$$”on the LCD becomes “20”.

7. Press the X key on the set or

–

key on the remote

commander to write the adjusted value. (## blinks and disc mark rotates on the LCD)

8.Adjust with [VOL+]/[VOL--]keys so that the adjustment value of “##”on the LCD becomes “94”.

9. Press the X key on the set or

–

key on the remote

commander to write the adjusted value.

10.Press the [VOL+] key once to change the adjustment value of “**” on the LCD into “1B”.

11. Press the

X

key on the set or

 

–

 

key on the remote

 

commander to write the adjusted value. ($$ blinks and disc

 

mark rotates on the LCD)

 

 

 

 

 

 

12.

Adjust with [VOL+]/[VOL--]keys so that the adjustment value

 

of “$$”on the LCD becomes “F1”.

 

 

 

 

 

 

13.

Press the

 

key on the set or

 

 

 

 

 

 

key on the remote

X

 

 

–

 

 

 

commander to write the adjusted value. (## blinks and disc

 

mark rotates on the LCD)

 

 

 

 

 

 

14.

Adjust with [VOL+]/[VOL--]keys so that the adjustment value

 

of “##”on the LCD becomes “1A”.

 

 

 

 

 

 

15.

Press the

 

key on the set or

 

 

 

 

 

 

key on the remote

X

 

 

–

 

 

 

commander to write the adjusted value.

16.Press the x key four times and back to the Display Check mode.

19