5.Confirm that the model and version indicated on the title bar coincide with the codes displayed in the Device Name block and the Version block in the window.
6.Click the [Write + Verify] button.
The patch data writing and the verify processing will be executed automatically in the following order:
1)Writing to patch area (front area)
2)Writing to patch area (reverse area)
3)Verifying patch area (front area)
4)Verifying patch area (reverse area)
7.The operation will terminate with the a mark given to all areas.
If the ⋅ mark is given to any area, the nonvolatile memory will be faulty.
8. Click the [Usb Disconnect] button.
9. Confirm that the window becomes as shown below where the [Write + Verify] button and [Read] button are inactive.
10. Disconnect the USB cable from the personal computer and the set.
31 31