Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.
Press TUNING + or – repeatedly to tune in the desired station.
Press TUNER MEMORY.
Press TUNING + or – repeatedly to select the desired preset number.
Press ENTER.
Manual tuning preset

You can manually tune in and store the radio frequency of the desired stations.

1 Press TUNER BAND repeatedly to select “FM” or “AM”.

2

3

4

5

6

7 Repeat steps 1 through 6 to store other stations.

Other operations

To

Do this

Tune in a station

Follow the procedure described

with a weak signal

in “Manual tuning preset”

 

(page 25).

 

 

Set another station

After step 4, press TUNING +

to the existing

or – repeatedly to select the

preset number

preset number you want to store

 

the station.

 

 

To change the AM tuning interval (except for European model)

The AM tuning interval is factory-preset to

9kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding FUNCTION on the system, press ?/1 on the system. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Tips

•The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs.

•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.

Tuner
25GB