Getting Started

Preparing the remote

Pull out the insulating sheet to allow power to flow from the battery.

The remote already contains a battery.

Replacing the battery in the remote

1Slide out and remove the battery case.

2Insert a new lithium battery CR2025 with the + side facing up.

A lithium battery CR2025

3Slide the battery case back in.

Note

If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery leakage and corrosion.

Notes on lithium battery

•Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

•Wipe the battery with a dry cloth to assure a good contact.

•Be sure to observe the correct polarity when installing the battery.

•Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

Tip

When the remote can no longer operate the system, replace the battery with a new one.

WARNING

Battery may explode if you mistreated.

Do not recharge, disassemble or dispose of in fire.

10GB