Connecting the system to the network

After the software installation is complete, connect the system to your computer using the Ethernet port of your computer, a router with a built-in network switch, or a network switching device.

The connection method may vary depending on your network. Connection with a personal computer is described here as an example.

For details, refer to the Connection manual contained on the supplied CD-ROM.

Example: DSL or cable modem equipped with a built-in router (without network switch ports)

Internet

DSL or cable modem with a built-in router*

Hub

Network cable (supplied)

To Ethernet port

NAS-CZ1

NAS-CZ1

Computer

* Connections may vary depending on your network.

12GB