Using e-mail

3Entering the text of a message

Enter the text of the message. You can select the text from the message list, or modify it to suit your purposes. The list shows up to six messages.

(1) Select [Message], then press the centre z on the control button. The message list appears.

,

The list shows messages that were made previously.

When you choose to use the selected text, select [OK], then press the centre z on the control button. After you select the message, go to “4Sending e-mail” on page 34.

If you modify the selected text, select [Edit], then press the centre z on the control button. The character input screen appears. Go to step 3.

(2) Select [ New], then press the centre z on the control button. The character input screen appears.

Operation Network

,

(3) Enter your message.

For details on how to input characters, see “How to input characters” on page 8.

Note

The total number of characters you can enter is 512.

33-GB