Getting help
Sony Notebook User Guide
n N
87
I cannot print
❑Check that all the cables of the printer are correctly connected.
❑Check that your printer is correctly configured and that you have
❑The default setting for the printer port mode is correct for most printers. If you cannot print, try changing the printer port mode. In Sony Notebook Setup, select the Printer tab. If the printer port mode is set to ECP, change it to
About digital video captures and DVgate
While I am recording images to a digital video device using DVgate, my system displays the message 'Recording to DV device failed. Check the power and cable connections to the DV device and try the operation again...'
Close all open applications and restart your computer. Frequent recording of images to a digital video device while using DVgate sometimes causes this error.
About power management
The power management setting is not responding
Your notebook’s operating system may become unstable if a lower power state, such as Hibernate is initiated, and then changed before the notebook completely enters the lower power state.
To restore the notebook to its normal operating stability, proceed as follows:
1Close all open applications.
2Push and hold the power button for four seconds or longer to shut down the notebook.