Connecting peripheral devices

n N

Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

72

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting a Universal Serial Bus (USB) mouse

 

User

 

You can connect a USB device (e.g. mouse, floppy disk drive, keyboard, printer, …) to your computer.

 

Notebook

Before connecting or disconnecting a USB peripheral, you do not need to shut down the computer.

You may need to install software (device drivers) supplied with your USB device before using the USB device.

 

 

There are 2 USB ports at the back of your notebook and 3 USB ports at the back of the optional port

Sony

replicator.

 

To connect a USB mouse, proceed as follows:

 

 

 

 

1 Select the USB port (1) of your choice.

 

 

2 Plug the USB mouse cable (2) into the USB connector.

 

 

You can use your USB mouse (3).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You do not need to shut down the computer before connecting or disconnecting a USB peripheral.

The USB mouse software driver is preinstalled on your notebook, therefore, you only need to plug the USB mouse into the USB connector and you can start working.

You may need to install software (device drivers) supplied with your USB device before using the USB device.