Sony PCG-GRX416G About peripherals, ECP, ECP, Printer, bi-directional, bi-directional, Sony Notebook Setup, Sony Notebook Setup, Sony Notebook Setup

Getting help

Sony Notebook User Guide

n N

101

About peripherals

I cannot use DV devices. The message 'DV equipment seems to be disconnected or turned off' appears

❑Check that the DV device is turned on and that the cables are properly connected.

❑If you are using multiple i.LINK™ devices, the combination of the connected devices may cause unstable operation. In this case, turn off the power of all connected devices and disconnect unused devices. Check the connection and then turn on the power again.

❑Use manual import/export in DVgate motion if problems occur with third party cameras.

❑You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices.

My PC Card is not working

❑Make sure the PC Card is compatible with your version of Windows®.

❑Use the Sony Notebook Setup utility to disable devices you are not currently using.

❑If you are using two PC Cards, use the Sony Notebook Setup utility to disable the devices you are not currently using.

I cannot print

❑Check that the printer cables are correctly connected.

❑Check that your printer is correctly configured and that you have up-to-date drivers. If needed, contact your dealer.

❑The default setting for the printer port mode is correct for most printers. If you cannot print, try changing the printer port mode. In Sony Notebook Setup, select the Printer tab. If the printer port mode is set to ECP, change it to bi-directional. If the printer port mode is set to bi-directional, change it to ECP.