Sony PCG-GRX416G Attaching your computer to the port replicator, (3), computer, into place, and an AC outlet, replicator turns green, connector on the port replicator

Connecting peripheral devices

Guide	Attaching your computer to the port replicator
User	To attach your computer to the port replicator, proceed as follows:
Notebook	1	Disconnect all peripherals from the
		into the DC In port (2) on the port replicator
		computer.
Sony	2	Plug the cable attached to the AC adapter (1)
		(3).
	3	Plug the power cord (4) into the AC adapter
		and an AC outlet.
		The power indicator DC IN of the port
		replicator turns green.
	4	Close the cover and align the bottom
		connector of the notebook with the
		connector on the port replicator.
	5	Gently press the notebook down until it clicks
		into place.
	6	Open the cover and turn on the notebook.

✍When you use the port replicator for the first time, the installation of the network drivers starts automatically.

When attaching your computer to the port replicator, do not attempt to insert or remove the battery pack. Lifting and turning the computer with the attached port replicator may cause a

temporary loss of power.

Use the AC adapter that comes with your notebook or the optional Sony adapter.

n N

67