Connecting peripheral devices
Guide | Attaching your computer to the port replicator | |
User | To attach your computer to the port replicator, proceed as follows: | |
| ||
Notebook | 1 | Turn off the computer and disconnect all |
| into the DC In port (2) on the port replicator | |
|
| peripherals. |
Sony | 2 | Plug the cable attached to the AC adapter (1) |
| (3). | |
|
| |
| 3 | Plug the power cord (4) into the AC adapter |
|
| and an AC outlet. |
|
| The power indicator DC IN of the port |
|
| replicator turns green. |
| 4 | Align the bottom connector of the notebook |
|
| with the connector on the port replicator and |
|
| push down until it clicks into place. |
| 5 | Turn on the notebook. |
✍When you use the port replicator for the first time, the installation of the network drivers starts automatically.
When attaching your computer to the port replicator, do not attempt to insert or remove the battery pack. Lifting and turning the computer with the attached port replicator may cause a temporary loss of power.
Use the AC adapter that comes with your notebook or the optional Sony adapter.
n N
60