Connecting peripheral devices | n N | |||||
Guide |
|
|
|
| 51 | |
|
|
|
| |||
Disconnecting your computer from the docking station | ||||||
| ||||||
User | To disconnect your computer from the docking station, proceed as follows: |
| ||||
|
| |||||
Notebook | 1 | If the notebook is off, simply follow steps 3 to 5. |
| |||
4 | Grab the right and left release levers (1) and pull them to the outside until you hear two clicks. | |||||
| 2 | If the notebook is on, click Start, then Eject PC or pull the UNDOCK switch towards you. |
| |||
| 3 | Close the cover of your notebook. |
| |||
Sony |
|
|
|
|
| |
|
|
|
|
|
| |
5Release the notebook from the docking station.
Do not undock the notebook when the docking station indicator is on. If you undock when the docking station indicator on the notebook is on, you may lose data or malfunction may occur. Make sure all cables and peripherals are removed before disconnecting the main unit from the docking station.
Make sure the battery is connected when you undock the main unit while it is running. If you undock when battery power is low, you may lose data.
If the i.LINK™ device is connected, stop the i.LINK™ device before undocking.
You cannot undock when the notebook is in a power saving mode. Return to normal mode before undocking.
Do not place any objects on top of the notebook when you handle the release levers. Do not wait too long before you release the notebook from the docking station.