Getting help

Sony Notebook User Guide

n N

80

About the docking station

Icannot operate the CD-RW/DVD-ROM drive or the DVD-ROM drive in the docking station connected to the notebook

To switch on the i.LINK™ network switch, proceed as follows :

1 Disconnect your notebook from the docking station.

2 Disconnect the AC adapter and all cables from the docking station if necessary.

3 Set the i.LINK™ network switch on the bottom of the docking station to the unmarked side with a thin pen tip.

4 Connect the docking station to your notebook.

5 Turn on your notebook.

You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.

￿ Do not set the i.LINK™ network switch when the notebook is on. It causes malfunction. Set the i.LINK™ network switch after removing all cables connected to the docking station.

Icannot operate the CD-RW/DVD-ROM drive or the DVD-ROM in the docking station connected to the notebook when the notebook is connected to another computer by means of an i.LINK™ cable

Set the i.LINK™ network switch on the bottom of the docking station to the On position.

I cannot remove the disk inserted in the drive

You cannot remove disks when the computer is in a power saving mode. Return to normal mode and then press the eject button.

The disk tray does not eject even when the eject button is pressed

Open the tray by inserting a sharp, pointed object in the manual eject hole.