Sony PCM-M1 — Semi-automode, Writing the first Start ID automatically, 4 Press CLOCK/SET, 6 Press CLOCK/SET, 3 Press RESET • + or COUNTER

Notes

•The buttons except the pSTOP button do not

work while is flashing.

•When writing Start IDs continuously, make sure that there is an interval of 9 seconds or longer (18 seconds or longer in the LP mode) between the start IDs. Otherwise, the tape- corder may not locate the beginning of a track correctly.

2 Press CLOCK/SET for 2 seconds or longer. ”CLOCK” will appear in the display.3 Press RESET • + or COUNTER• – repeatedly and select ”SET SID”.4 Press CLOCK/SET.5 Press RESET • + or COUNTER • – repeatedly and select ”SID on” or ”SID oFF”.

SID on: The recorder will write a Start ID when you start recording or release pause.

SID oFF: The recorder will not write a Start ID when you start recording or release pause.

6 Press CLOCK/SET.

The display returns to the clock.

Writing the first Start ID automatically— Semi-auto mode

The Semi-auto mode is a further option in the Manual mode. The Semi-auto mode will write a Start ID automatically at the first sound input during Manual mode. Use this feature to write a Start ID for each take.

1 If ”AUTO-ID” is present in the display, press START ID • MODE repeatedly until it disappears.

2 Hold down START ID • MODE until ”AUTO-ID” flashes in the display.

When you start recording, a Start ID will be written automatically at the first sound input.

continued

Recording

Recording 31EN