Note

Start IDs cannot be

written while is flashing rapidly during the Rehearsal function.

2 Press RESET • + or COUNTER

• – repeatedly and select ”LEV SID”.

3 Press CLOCK/SET.

The current threshold value and the peak indication meter will

flash.--dB

4 Press RESET • + or COUNTER • – repeatedly and select the threshold value of your choice. With each press, the display will change as follows.

– 50

– 40

– 32

– 24

– 18

– 12

 

– 00

– 02

– 04

– 06

– 08

5 Press CLOCK/SET.

The display returns to the clock.

Writing Start IDs during playback

You can write a Start ID anywhere you want without erasing the contents of the existing recording.

1 Press the START ID • MODE button on

the main unit repeatedly until “AUTO ID” appears (to go into the auto mode) or disappears (to go into the manual mode).

2 Press the START ID • ENTER button during playback where you want to rewrite.

“REHRSAL” flashes when you select the point for Start ID. The recorder plays back a 3 second segment repeatedly, up to 16 times (Rehearsal function).

Recording

Recording 33EN