Getting help
Sony VAIO Desktop User Guide
n N
62
About the computer and software
My computer does not start
❑Check that the computer is plugged into a power source and that it is turned on.
❑Check that the power indicator on the front panel of the computer indicates that the power is on.
❑Confirm that the power cord and all cables are connected firmly.
❑If you have plugged the computer into an Uninterrupted Power Supply (UPS), make sure the UPS is turned on and works.
❑Check that the monitor is properly connected to the main unit. Check that the brightness and contrast controls are adjusted correctly.
❑Moisture condensation may have occurred. Wait at least an hour before turning the computer on.
The message 'Press <F1> to continue, <F2> to enter setup' appears at startup
If the message Press <F1> to continue, <F2> to enter setup appears at the bottom of the display, you need to initialise the BIOS.
To initialise the BIOS, proceed as follows:
1Turn off the computer.
2Remove any peripheral devices connected to the computer.
3Turn on the computer and press <F2> when the Sony logo appears. The BIOS setup menu screen appears.
4Use the arrow keys to select the Exit menu.
5Press <F5> or use the arrow keys to select Load Setup Defaults. The message Load default configuration now? appears.
6Make sure that Yes is selected and then press <Enter>.