Waking up to music (continued)

Tips

•To exit the standby mode, press STANDBY

to make the indication disappear.

•The preset settings remain until you reset them.

4 Set the timer to the hour and the minutes you want the music to start.

1Turn MULTI JOG to set the hour and press

ENTER MEM.

2Turn MULTI JOG to set the minutes, and press

ENTER MEM.

5 Set the timer to the hour and the minutes you want the music to go off. (Do as step 4.)

6 Turn MULTI JOG to set the volume you want, and press ENTER MEM.

7 Press STANDBY.

The indication lights up and the power goes off; the player enters the standby mode.

At the preset time, the power will go on and music will fade in. Then music will fade out and the power will go off at the preset time, and the player will enter the standby mode again.

To check/change the waking up timer settings

Press TIMER, then ENTER MEM. Each time you press ENTER MEM, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it.

To use the player before a timer playback starts

If you turn on the player, you can use it as usual ( in case of the radio, if you listen to the station which is different from the one you tuned in step 1 on page 25, you will hear that station at the preset time.) Turn off the player before the preset time.

To stop play

Press POWER to turn off the power.

26The Timer