Timer-recording radio programs (continued)

Tips

•To exit the standby mode, press STANDBY to make the indication disappear.

•The preset settings remain until you reset them.

4 Set the timer to the hour and the minutes you want to start recording.

1Turn MULTI JOG to set the hour and press

ENTER MEM.

2Turn MULTI JOG to set the minutes, and press

ENTER MEM.

5 Set the timer to the hour and the minutes you want to stop recording. (Do as step 4.)

6 Turn MULTI JOG to set the volume you want, and press ENTER MEM.

7 Press STANDBY.

The indication lights up and the power goes off; the player enters the recording standby mode.

At the preset time, the power will go on and music will fade in and the recording will start. Then music will fade out and the power will go off at the preset time, and the player will enter the standby mode again.

To check/change the recording timer settings

Press TIMER, then ENTER MEM. Each time you press ENTER MEM, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it.

28The Timer