4Press CD u .Display
CD
The player plays all the tracks of all the CDs in the CD tray once.
CD number Track Playing numbertime
Operations Basic
Tips
•You can change a CD while playing another. Press Z CD OPEN/ CLOSE to pull out the CD tray and change the CD. Press Z CD OPEN/ CLOSE again to close the CD tray.
•Next time you want to listen to a CD, just press CD u. The player turns on automatically and starts playing the CD.
Notes
•Do not pull out the CD tray by hand, as that may cause trouble or malfunction.
•If the CD tray does not turn when you press DISC CHANGE, press Z CD OPEN/CLOSE to close the CD tray and then press DISC CHANGE again.
Use these buttons for additional operations
| POWER |
| Z CD OPEN/CLOSE |
| DISC CHANGE |
| VOLUME |
| MULTI JOG |
| x |
| CD u |
To | Do this |
adjust the volume | Turn VOLUME (press VOL |
| +, – on the remote). |
stop playback | Press x on the CD section. |
pause playback | Press CD u (X on the remote). |
| Press the button again to resume |
| play after pause. |
go to the next track | Turn MULTI JOG clockwise |
| (press > on the remote). |
go back to the previous Turn MULTI JOG | |
track | counterclockwise (press . on the |
| remote). |
remove the CD | Press Z CD OPEN/CLOSE. |
turn on/off the player | Press POWER. |
play only one CD | Press MODE until “ALL DISCS” |
| disappears, press DISC CHANGE to |
select the desired CD and then press CD u (DISC 1, DISC 2 or DISC 3 on the remote).
Basic Operations
5