Timer-recording radio programs
You can set timer to record the radio | STANDBY | |
at a certain time. You can also record | TIMER | |
the sound of the component connected | ||
| ||
to the LINE IN jacks of the player. | ENTER | |
Make sure you have set the clock (see | ||
“Setting the clock” on page 24). | MEM | |
|
Notes
•You cannot preset recording timer and waking up timer (page 25) at the same time.
•When recording from the component connected to the LINE IN jacks of the player, refer to the operating instructions of the component.
Tip
When you receive the AM program in step 1, press z/X to check if the noise is heard. If so, press MODE to select the position that most decreases the noise.
Before you begin, make sure the 
(clock) indication is not lit in the display. If it is lit, press STANDBY.
1 Tune in the radio station and insert a blank tape into the tape compartment with the side you want to record on facing you.
2 Press TIMER to display the 
indication.
Do the following operations by checking the display window.
3 Turn MULTI JOG to display “RADIO” and “REC”, and press ENTER MEM.
When recording from the component connected to the LINE IN jacks of the player, turn MULTI JOG to display “LINE” and “REC”, and press ENTER MEM.
Timer The
continued
The Timer 27