Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 6 Ω loads, both channel driven from 120 - 10 000 Hz; rated 50 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion from 250 milliwatts to rated output.
Other Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20 000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1 710 kHz
Antenna
FM: Lead antenna
AM: Loop antenna
Recording system
Approx. 100 s (sec.) with Sony cassette
TYPE I (normal): 100 - 10 000 Hz
General
Speaker
Woofer: 13 cm (5 1⁄8 inches) dia.,
Tweeter: 5 cm (2 inches) dia.,
6Ω, cone type (2)
Inputs
LINE IN jacks (2 phono jacks): Sensitivity 220 mV
Outputs
Headphones jack (stereo minijack): For 8 - 32 Ω impedance headphones Speaker terminals: For supplied 6 Ω impedance speaker
Power output (excluding US model)
50W + 50 W (at 6 Ω, 10 % harmonic distortion)
Power requirements
For personal component system:
120V AC, 60 Hz
For remote control: 3 V DC, 2 size AA (R6) batteries
Power consumption
AC 110 W
Dimensions
Player: approx. 285 ⋅ 322 ⋅ 408 mm (w/h/d) (11 1⁄4 ⋅ 12 3⁄4 ⋅ 16 1⁄8 inches)
Speaker: approx. 200 ⋅ 316 ⋅ 250 mm (w/h/d) (7 7⁄8 ⋅ 12 1⁄2 ⋅ 9 7⁄8 inches)
Mass
Player: approx. 7.7 kg (16 lb. 16 oz.)
Speaker: approx. 3.15 kg (6 lb. 15 oz.) Supplied accessories
Remote control (1) FM lead antenna (1) AM loop antenna (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphone series
42Additional Information