Using the Glasstron
If you set the user lock, unlock it (page 23).
Before you start…
Be sure to follow the procedures in “Connecting the Glasstron” (pages 12 - 15) and “Wearing the Glasstron” (pages 16 - 18).
WARNING
Each time this product is used, adjustment screens will appear, requiring the viewer to properly fit the product. To prevent eye damage, do not use this product if the vertical lines do not cross the horizontal line on the next screen.
The Glasstron includes two small (left and right) LCDs. You are watching a combined picture created from these two screens. Although the screen position is properly aligned at the factory, it may become misaligned if the Glasstron is deformed or damaged. Check the screen position alignment every time you turn on the Glasstron. If you cannot have correct screen alignment, stop using the Glasstron immediately.
1 Turn on the Glasstron using the POWER ON/OFF switch.The POWER lamp lights up.
Screen
POWER 
ON/OFF
continued
Operations