3 | Start playback on the video equipment connected to the |
| Glasstron. |
4 | Adjust the volume by turning the VOL control. |
| When you set the AVLS ON/OFF switch to ON, you cannot turn up the volume beyond |
the defined limit (see page 22).
|
| VOL |
| lower | louder |
5 | Check that the four corners of the screen are clear. | |
| If the four corners of the screen are not clear, do the step 2 (page 20) to check the screen | |
| position alignment again. |
|
6 | Adjust the brightness by turning the BRIGHT control. | |
BRIGHT
－� ＋�
less bright | brighter |
continued
Operations