Using an optional battery pack
If you use a battery pack such as the
Charge the battery pack before use by using the optional battery charger,
When not using the unit, keep the cover on the power supply box.
BATT/COVER RELEASE button
2 | Attach the battery pack to the power supply box. |
| |
| Install the battery pack properly making |
|
|
| sure it is not crooked against the power | Power supply box | Battery pack |
| supply box. | ||
|
|
To remove the battery pack, slide and hold the BATT/COVER RELEASE button and pull the battery pack off.
BATT/COVER RELEASE button
Battery pack | Battery life |
Approx. 7 hours | |
|
|
*The above indications are for fully charged batteries.
*Actual battery life depends on conditions of use.
*You can also use a battery pack such as the
*You can use an “InfoLITHIUM™” battery pack with the Glasstron. When using such a battery pack, the estimated remaining battery life is displayed with the indicator instead of the time counter.
Notes
•While using the battery pack, if you connect or disconnect the AC power adaptor, the power turns off. To turn the power on, press the POWER ON/OFF switch again.
•If the POWER lamp flashes while using the battery pack, replace the battery pack with a fresh one.
•Battery life may be shorter in a cold environment. This is a typical battery characteristic.
“InfoLITHIUM” is a trademark of Sony Corporation.