Locations and Functions of Parts and Controls 27
Chapter 1 Overview
bRecording format
Indicates the current recording format or the
recording format of clip being currently played.
•UDF mode
HD422 50
HD420 HQ
IMX50
DVCAM
• FAT mode
HQ1920
HQ1440
HQ1280
SP1440
DVCAM
cRecording mode
UDF: UDF mode
FAT: FAT mode
dFile format
MXF: When the recording mode is UDF
MP4: When the recording mode is FAT-HD
mode
DV-AVI: When the recording mode is FAT-SD
mode
eSystem frequency
Indicates the system frequency of video being
currently played or recorded.
59.94i
29.97P
23.98P
50i
25P
59.94P
50P
fStatus display
PB: Appears during play.
NDF: Appears when non-drop-frame timecode is
selected.
EXT-LK: Appears when the internal timecode
generator is locked to an external signal input
to the TC IN (timecode input) connector.
HOLD: Appears when the operation mode of the
internal timecode generator is set to R-RUN
and stopped.
gAudio format
Indicates the audio recording format or the audio
format of clip being currently played.
hAudio level indicators
Indicate the audio recording or play levels of
channels 1 to 4.
iTime counter display
Switches displays of time counter values,
timecode, and user bits data, depending on the
position of the DISPLAY switch.
Displays the type of data currently shown in the
time counter, as follows.
TCG: Recorded timecode
TCR: Playback timecode
UBG: Recorded user bits
UBR: Playback user bits
CNT: Counter
CLK: Time display (when the PRESET/REGEN/
CLOCK switch is set to CLOCK)
When the HOLD button is pressed to hold the
timecode value, the timecode is displayed in the
format shown below. When the HOLD button is
pressed again to release the hold, the timecode is
displayed in the normal format.
jWarning indicator area
Displays warnings when trouble with recording
or moisture condensation occurs.
For details, see “Operation Warnings” on page 176.
You can also display the name of the next clip to
be recorded (see page12 7).
kRemaining media capacity indicator
Shows bar segments indicating the remaining
capacity of recording media in the slots.
Indication Status
Recording
mode
Recording format
16bit FAT Any format
UDF • HD420 HQ
•DVCAM
• IMX (Audio Length is
set to16 bit)
24bit UDF • HD422 50
• IMX (Audio Length is
set to24 bit)
The three dots indicates that timecode is
displayed in the hold mode.