Paradyne 317x E1 Near End Group ± ªdsx1Fdlº Object dsx1ConfigEntry, Far End Group, DS1/E1 MIB

ACCULINK 317x E1 DSU/CSU

Near End Group ± ªdsx1Fdlº Object (dsx1ConfigEntry 13)

This object specifies how Facility Data Link is being used. Only the following values are supported by the E1 DSU/CSU. More than one value may be active at a time.

•dsx1other(1) ± SNMP data is being sent over the FDL.

•dsx1Fdl-none(8) ± Indicates that the device does not use FDL. This value is always returned for the DTE Drop/Insert interface. It is also returned for the network interface when the FDL management link is disabled.

Near End Group ± The DS1 Current Table Objects (dsx1CurrentEntry)

The following DS1 current table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1CurrentIndex ± The index that identifies the E1 interface.

•dsx1CurrentESs ± Errored Seconds for the current interval.

•dsx1Current SESs ± Severely Errored Seconds for the current interval.

•dsx1CurrentUASs ± Unavailable Seconds for the current interval.

•dsx1CurrentBESs ± Bursty Errored Seconds for the current interval.

Near End Group ± The DS1 Interval Table Objects (dsx1IntervalEntry)

The following DS1 interval table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1IntervalIndex ± The index that identifies the E1 interface.

•dsx1IntervalNumber ± The interval number (1 to 96).

•dsx1IntervalESs ± Errored Seconds for the interval.

•dsx1Interval SESs ± Severely Errored Seconds for the interval.

•dsx1IntervalUASs ± Unavailable Seconds for the interval.

•dsx1Interval BESs ± Bursty Errored Seconds for the interval.

Near End Group ± The DS1 Total Table Objects (dsx1TotalEntry)

The following DS1 total table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1TotalIndex ± The index that identifies the E1 interface.

•dsx1TotalESs ± The 24-hour total Errored Seconds.

•dsx1Total SESs ± The 24-hour total Severely Errored Seconds.

•dsx1TotalUASs ± The 24-hour total Unavailable Seconds.

•dsx1TotalBESs ± The 24-hour total Bursty Errored Seconds.

Far End Group, DS1/E1 MIB

The DS1 Far End Group consists of the following three tables:

•DS1 Far End Current

•DS1 Far End Interval

•DS1 Far End Total

These tables are not supported for either the network or DTE Drop/Insert interface.

E-10 December 1996 3170-A2-GB20-20