Paradyne 317x E1 manual Configuring for Network Timing, Configuring for External Timing

ACCULINK 317x E1 DSU/CSU

Configuring for Network Timing

To configure for network timing,

1.Press F3 to select Cnfig from the top-level menu screen.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Press F1 to select Edit.

4.Press the key from the Edit screen to display the Gen selection.

5.Select Gen for the general configuration options.

Edit:

NET Chan Gen

F1 F2 F3

6.Select the primary clock source. For network, press F2 (note that network is also the default).

Pri Clk Src:NET

Next NET DTE

F1 F2 F3

NOTE

The procedure for configuring the secondary clock source is similar to the example shown above. For more information on configuration options, refer to Appendix C.

Configuring for External Timing

To configure the E1 DSU/CSU for external timing,

1.Press F3 to select Cnfig from the top-level menu screen.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Press F1 to select Edit.

4.Press the key from the Edit screen to display the Gen selection.

5.Select Gen for the general configuration options.

Edit:

NET Chan Gen

F1 F2 F3

6.Select the primary clock source. For external,

press the key until the Ext selection scrolls onto the screen.

Pri Clk Src:NET

Next NET DTE

F1 F2 F3

7.Press the appropriate Function key to select external timing.

Pri Clk Src:NET

Prtn Int Ext

F1 F2 F3

8.Select the appropriate external clock rate by pressing the corresponding Function key. This step is mandatory if you have chosen external clocking.

3-34 December 1996 3170-A2-GB20-20