Paradyne 317x E1 Saving Edit Changes, Selecting/Copying to a Specific Port, Edit DTE Port NET

Operation

Saving Edit Changes

Save edit changes to the Active area when you want those changes to take effect immediately. Save edit changes to the Customer area when you want to overwrite the existing Customer configuration options and store these changes for future use.

NOTE

If you attempt to exit the Edit function after making changes without performing a Save, the E1 DSU/CSU prompts you with Save Options? Choose Yes or No.

To save edit changes,

1.From the Choose Function screen (one level above the Edit screen, two levels below the top-level menu screen), press F2 to select Save.

Choose Funct:

Edit Save

F1 F2 F3

2.Choose whether you want to save to the Active, Customer 1, or Customer 2 area. Use the scroll keys, if necessary.

Save Edit to:

Activ Cust1

F1 F2 F3

Selecting/Copying to a Specific Port

For the E1 DSU/CSU, you have the capability of selecting a specific port to configure, and then copying the configuration options from that port to another port (or to all ports).

To select a specific port to configure,

1.Press F3 to select Cnfig from the top-level menu screen.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Press F1 to select Edit.

4.Press F2 to select Port.

Edit:

DTE Port NET

F1 F2 F3

5.From the Port Select screen, press the Function key that corresponds to the port you want to

configure. Use the key to scroll addition ports onto the screen, if necessary. Configure the port (see Appendix C, Configuration Options).

Port Select:

Copy Prt1 Prt2

F1 F2 F3

To copy the configuration options to one or all ports,

6. From the Port Select screen, press F1 (Copy).

Port Select:

Copy Prt1 Prt2

F1 F2 F3

3170-A2-GB20-20 December 1996 3-13