Paradyne 317x E1 Com Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 38.4 Prev, Char Length Next 7 8 Prev

ACCULINK 317x E1 DSU/CSU

Table C-7

(2 of 3)

User Interface Configuration Options

Com Rate: 9.6

Next 1.2 2.4 4.8 9.6 14.4 19.2 38.4 Prev

Communication Port Rate. Configures the bit rate for the communication port.

1.2± Sets the bit rate to 1200 bps.

2.4± Sets the bit rate to 2400 bps.

4.8± Sets the bit rate to 4800 bps.

9.6± Sets the bit rate to 9600 bps.

14.4± Sets the bit rate to 14,400 bps.

19.2± Sets the bit rate to 19,200 bps.

38.4± Sets the bit rate to 38,400 bps.

NOTE: This configuration option is not available if the communication port is configured for synchronous operation and the clock source is external.

Char Length: 8

Next 7 8 Prev

Communication Port Character Length. Configures the character length (7 or 8 bits) for the communication port.

NOTE: This configuration option must be set to 8 if the communication port is used for Front Panel Emulation or SNMP management.

NOTE: This configuration option is not available if the communication port is configured for synchronous operation.

CParity: None

Next None Even Odd Prev

Communication Port Parity. Configures the parity (none, even, or odd) for the communication port.

NOTE: This configuration option is not available if the communication port is configured for synchronous operation.

CStop Bits: 1

Next 1 1.5 2 Prev

Communication Port Stop Bits. Configures the number of stop bits (1, 1.5, or 2) for the communication port.

NOTE: This configuration option is not available if the communication port is configured for synchronous operation.

C-14 December 1996 3170-A2-GB20-20