Paradyne 317x E1 manual Table C-4 DTE Channel Configuration Options, DTE Channels TS16 Assign

ACCULINK 317x E1 DSU/CSU

Channel Configuration

Options

The Channel configuration options are divided into two tables as follows:

•DTE Channel Configuration Options (Table C-4)

•Data Port Channel Configuration Options (Table C-5)

NOTE

Entering the Channel (Chan) Configuration branch allows you to select Display (Dsply), Clear, DTE (if enabled), or one of the data ports. Tables C-4 and C-5 describe the DTE and data port configuration options. For information about the operation of Display and Clear, refer to the Configuring DS0 Channels section in Chapter 3, Operation.

Table C-4

DTE Channel Configuration Options

DTE Channels:

TS16 Assign

DTE Drop/Insert Channel. Allows the selection of time-slot 16 (TS16) for signaling information or assigns DS0 channels from the DTE Drop/Insert interface to DS0 channels on the Network E1 interface.

TS16 ± Allows the selection of TS16 for signaling information (see the TS16 configuration option below).

Assign ± Allows the assignment of DS0 channels from the DTE Drop/Insert interface to the Network E1 interface.

TS16: Rsvd

Data Rsvd

DTE Drop/Insert TS16 Allocation. Specifies whether time-slot 16 (TS16) is reserved for signaling information or available for data.

Data ± Specifies that TS16 is available for data.

Rsvd ± Specifies that TS16 is reserved for signaling information.

NOTE: Changing this configuration option from one selection to the other (Data or Rsvd), deallocates all DS0 channels assigned to either the Network E1 interface or the DTE Drop/Insert interface.

N1

N2

N3

N4

N5

N6

N7

N8

N9

N10

N11

N12

N13

N14

N15

...

N31

±

±

±

±

±

±

±

±

±

±

±

±

±

±

±

...

±È

DTE Drop/Insert Channel Allocation. Assigns DS0 channels from the DTE Drop/Insert interface to the Network E1 interface.

Line 1 displays the 31 channels for the Network E1 interface. Line 2 displays what is allocated to the DS0 channel indicated in Line 1. Possible values for Line 2 are:

Value Meaning

±This DS0 channel is not allocated. You can modify this value on this screen.

Prtn This DS0 channel is allocated to port n, where n is a number from 1 to 4. You cannot modify this value on this screen.

Dn This DS0 channel is allocated to the DTE Drop/Insert interface DS0 channel n, where n is a number from 1 to 31. You can modify this value on this screen.

Assign DTE channels to Network channels by pressing the Function key below the Network channel desired. The DTE channel number scrolls up one number each time you press the Function key. Only unassigned DTE channels appear during scrolling.

NOTE: If time-slot 16 is reserved for signaling (see the TS16 configuration option), D16 is automatically allocated to N16 and will not be available for allocation on this screen.

C-8 December 1996 3170-A2-GB20-20