Paradyne 317x E1 manual DTE Drop/Insert Port LEDs, Pdv

ACCULINK 317x E1 DSU/CSU

			Table 3-3
			DTE Drop/Insert Port LEDs
Name	Color		Meaning
SIG	Green	Monitors the signal being received from the DTE Drop/Insert port.
		ON:	A recoverable signal is being received from the DTE Drop/Insert
			port.
		OFF:	The signal cannot be recovered from the DTE Drop/Insert port
			(a Loss of Signal condition exists).
OOF	Yellow	Monitors Out Of Frame (OOF) conditions on the received DTE Drop/Insert signal.
		ON:	At least one OOF was detected on the signal during the sampling
			period.
		OFF:	No OOFs were detected on the signal during the sampling period.
ALRM	Yellow	Indicates whether an alarm condition exists on the received DTE Drop/Insert signal.
		ON:	An alarm condition (LOS, LOF, EER, RAI, AIS) exists on the
			received DTE Drop/Insert signal. Use the Device Health and Status
			command to determine the alarm type.
		OFF:	No alarm condition exists on the DTE Drop/Insert Interface signal.
PDV	Yellow	Monitors Pulse Density Violations (PDV) on the received DTE Drop/Insert signal.
		ON :	At least one PDV was detected (and corrected) on the received
			DTE Drop/Insert signal during the sampling period.
		OFF:	No PDVs were detected on the received DTE Drop/Insert signal
			during the sampling period.
BPV	Yellow	Monitors Bipolar Violations (BPV) on the received DTE Drop/Insert signal.
		ON:	At least one BPV was detected (and corrected) on the received
			DTE Drop/Insert signal during the sampling period.
		OFF:	No BPVs were detected on the received DTE Drop/Insert signal
			during the sampling period.

3-6 December 1996 3170-A2-GB20-20