Paradyne 317x E1 manual Displaying Unit Identity

ACCULINK 317x E1 DSU/CSU

Displaying Unit Identity

The identity of the E1 DSU/CSU (serial number, model number, software revision level, hardware revision level, and customer identification) is available through the Status branch of the front panel menu (see Appendix A, Front Panel Menu).

The customer identification is the only identity number you can change.

To display the E1 DSU/CSU's identity (ID),

1.Press F1 to select Status from the top-level menu screen.

DSU E1 CEPT

Stat Test Cnfig

F1 F2 F3

2.Press the key three times on the Status screen to bring the ID selection onto the front panel LCD.

Status:
DevHS STest		Perf
F1	F2	F3

3. Press F3 to select ID from the Status screen.

Status:

TStat LED ID

F1 F2 F3

4.The following screens appear in the order listed

each time you press the key.

Identity:

Ser=xxxxxxx

F1 F2 F3

Identity:

Mod=xxxx-xx-xxx

F1 F2 F3

NOTE

The third-from-last digit in the model number may vary due to the type of power supply shipped with the E1 DSU/CSU. Refer to the label on the bottom of the E1 DSU/CSU for the correct model number.

Identity:

Cust ID=xxxxxxxx

F1 F2 F3

Identity:

SRev=xx.xx.xx

F1 F2 F3

Identity:

CCA1=xxxx-xxx

F1 F2 F3

Identity:

CCA2=xxxx-xxx

F1 F2 F3

3-8 December 1996 3170-A2-GB20-20