Paradyne 317x E1 manual Displaying E1 DSU/CSU Test Status, Aborting a Lamp Test

ACCULINK 317x E1 DSU/CSU

5.The following screens alternately appear on the LCD until you press a Function key to return to the Lamp Test screen. In addition, all LEDs blink.

F1 F2 F3

0123456789 : ; < = > ?

@ABCDEFGHIJKLMNO

F1 F2 F3

6.When you are satisfied that all LEDs are lighting and the LCD is functioning properly, abort the Lamp test from the Lamp Test screen. The Device Health and Status screen appears automatically if there is no activity on the E1 DSU/CSU front panel for five minutes. However, the Lamp test remains active until it is aborted.

Aborting a Lamp Test

To abort the Lamp test,

1.Display the Lamp Test screen. To do this when the LCD is alternating the Lamp test screens, press any Function key. Otherwise, follow Steps 1 through 3 for starting a Lamp test.

Lamp Test:

Abort Start

F1 F2 F3

2.From the Lamp Test screen, press F1 to select Abort.

Lamp Test:

Abort Start

F1 F2 F3

Displaying E1 DSU/CSU Test Status

Use the Test Status command to display the active tests for the E1 DSU/CSU. Status messages that can display on the front panel LCD are listed in Table 4-10.

To display test status,

1.Press F1 to select Stat from the top-level menu screen.

DSU E1 CEPT

Stat Test Cnfig

F1 F2 F3

2.From the Status screen, press the key once to display the TStat selection.

Status:
DevHS STest		Perf
F1	F2	F3

3. Press F3 to select TStat.

Status:
STest	Perf	TStat
F1	F2	F3

The Test Status screen appears showing you what tests are active for the E1 DSU/CSU.

4-24 December 1996 3170-A2-GB20-20