Paradyne 317x E1 Network Interface Configuration Options, NET Frame noCRC Next CRC4 noCRC Prev

Configuration Options

Network Interface

Configuration Options

Table C-3

Network Interface Configuration Options

NET Frame: noCRC

Next CRC4 noCRC Prev

Network Line Framing Format. Designates the framing format for the Network E1 interface.

CRC4 ± Configures for the CRC4 framing format.

noCRC ± Configures for the non-CRC4 framing format.

Mgmt Link: Disab

Next Disab SNMP Prev

FDL Management Link. Specifies whether Facility Data Link (FDL) is enabled. Selecting SNMP allows SNMP management traffic to flow over the 4 kbps data link provided by FDL. Running SNMP over FDL requires an end-to-end FDL connection and cannot be terminated within the network.

Disab ± Disables the FDL Management Link.

SNMP ± Enables the FDL Management Link for SNMP.

NOTE: This configuration option is not available and does not appear if EDL is enabled for SNMP.

NOTE: If the local E1 DSU/CSU's FDL is enabled for SNMP, the remote E1 DSU/CSU's FDL must also be enabled for SNMP.

Circuit Ident:

Next Edit Clear Prev

Network Circuit Identifier. Specifies the transmission vendor's circuit identifier for the purpose of facilitating troubleshooting. The network circuit identifier is an ASCII text string that may be up to 255 characters in length.

Edit ± Allows you to edit and/or display the network circuit identifier using the generic text string entry screen.

Clear ± Allows you to clear the network circuit identifier. The network circuit identifier will be set to a null string.

3170-A2-GB20-20 December 1996 C-7