Paradyne 317x E1 manual DTE Channels TS16 Assign, TS16Rsvd Data Rsvd

Operation

7.From the DTE Channels screen, press F1 to select TS16.

DTE Channels:

TS16 Assign

F1 F2 F3

8.Rsvd (Reserved) is the default for TS16. This indicates that time-slot 16 is reserved for signaling information. Pressing F1 (Data) makes time-slot 16 available for data.

TS16:Rsvd

Data Rsvd

F1 F2 F3

NOTE

If TS16 is reserved for signaling, D16 will automatically be assigned to N16, and DTE DS0 channels allocated to the network interface must be connected to the corresponding channel (e.g., D1 to N1, D2 to N2, etc.).

9.Press from the TS16 screen to return to the DTE Channels screen.

TS16:Rsvd

Data Rsvd

F1 F2 F3

10.From the DTE Channels screen, press F2 to select Assign.

DTE Channels:

TS16 Assign

F1 F2 F3

11.Press the Function key below the network channel desired. Each time that you press the Function key, the DTE channel number will scroll up one number. If the network channel is currently unassigned (``±º is displayed on Line 2), the DTE channel number initially displays the same number as the corresponding network channel number. However, if the network channel is currently assigned, the DTE channel number is shown as Dn. Pressing the Function key for D31 wraps the display back to D1. Only those channels that are not already assigned will appear on the LCD when scrolling. The network channels assigned to ports (Prt1...Prt4) are unavailable for assignment.

N1	N2	N3
D1	D2	±
F1	F2	F3

3170-A2-GB20-20 December 1996 3-31