Paradyne 317x E1 manual E1 DSU/CSU User Interface Access Security

Operation

E1 DSU/CSU User Interface Access Security

NOTE

This page of the manual is self- supporting and can be removed to prevent unwanted knowledge of the security access levels and their selection.

The user interface access security option allows you to limit access to the E1 DSU/CSU to display-only and non-intrusive functions.

Level 1 (Lvl1) access security allows access to all functions available through the menu tree. This is the default setting.

Level 2 (Lvl2) access security restricts access to only those functions that cannot affect the operation of the E1 DSU/CSU in any way. At this level,

•None of the functions in the Test or Ctrl branches are available.

•All functions on the Stat branch are available.

•All functions on the Cnfg branch are available for display, but they cannot be used to save to a configuration area (Activ, Cust1, Cust2, or Fact).

You can only reach the screen that controls security access using the front panel.

Changing User Interface Access Security

To change user interface access security,

1.Press the key two times from the top-level screen.

DSU E1 CEPT

Stat	Test	Cnfig
F1	F2	F3

2. Press the key three times.

DSU E1 CEPT

Stat	Test	Cnfig
F1	F2	F3

3. Press the key once.

DSU E1 CEPT

Stat	Test	Cnfig
F1	F2	F3

The Security screen appears.

Security:

Lvl1 Lvl2

F1 F2 F3

4.Press F1 to select Lvl1, or press F2 to select Lvl2. After you make a selection, the top-level screen appears.

If you do not make a selection within 5 minutes, the Automatic Device Health/Status screen appears.

3170-A2-GB20-20 December 1996 3-37