Paradyne 317x E1 manual DS0 channel allocation

Models: 317x E1

1 167
Download 167 pages 42.72 Kb
Page 157
Image 157
DS0 channel allocation

ACCULINK 317x E1 DSU/CSU

DSU

Data Service Unit. Data communications equipment that provides an interface

 

between the DTE and the digital network.

DS0

Digital Signal Level 0. A 64 kbps standard signal or channel.

DS0 channel allocation

Assigning specific DS0 channels in the E1 DSU/CSU to specific interfaces

 

(Network, DTE Drop/Insert, etc.).

DS1/E1 MIB

Defines objects for managing E1 interfaces and supports the network and DTE

 

Drop/Insert interfaces on the E1 DSU/CSU.

DTE

Data Terminal Equipment. The equipment, such as a computer or terminal, that

 

provides data in the form of digital signals.

DTE Drop/Insert interface

The drop/insert interface that is labeled ªDTEº on the rear panel of the E1

 

DSU/CSU.

DTLB

Data Terminal Loopback. Loops the data received from the selected port, for all

 

DS0 channels allocated to the port, back out the port.

DTR

Data Terminal Ready. V.24 circuit 108/1, /2.

EDL

Embedded Data Link. The 8 kbps in-band performance channel that provides

 

4 kbps of user bandwidth for the support of an SNMP management link.

EER

Excessive Error Rate. An error rate that is greater than the threshold that has been

 

configured in the E1 DSU/CSU.

EIA

Electronic Industries Association. An organization providing standards for the data

 

communication industry.

EIA 530A

An EIA standard for a high-speed, 25-position, DCE/DTE interface.

Enterprise MIB

MIB objects unique to Paradyne devices.

enterprise-specific trap

A trap unique to Paradyne devices.

error

A discrepancy between a measured or computed value or condition and the true or

 

specified value or condition.

ES

Errored seconds. Seconds with one or more error events.

ESD

Electrostatic discharge. An undesirable discharge of static electricity that can

 

damage equipment and degrade electrical circuitry.

E1

A wideband digital interface operating at 2.048 Mbps defined by CCITT standards

 

G.703 and G.704.

Fact

Factory configuration area. A configuration option set that is preset at the company

 

(read-only options).

failure

An uncorrected hardware error.

fault

An accidental condition that causes a functional unit to fail to perform its required

 

function.

FCC

Federal Communications Commission. A board of commissioners that regulates

 

electrical communication systems that originate in the United States.

FDL

Facility Data Link. The selected framing bits in a wide-area link that are used for

 

control, monitoring, and testing.

Fractional E1

Individual DS0 channels that may be sold separately or in groups to provide

 

bandwidth that is some fraction of the total E1 capability.

frame

One identifiable group of bits that includes a sequence of bits for control,

 

framing, etc.

Glossary-4

December 1996

3170-A2-GB20-20

Page 157
Image 157
Paradyne 317x E1 manual DS0 channel allocation