Paradyne 317x E1 Displaying DS0 Channel Assignments, Display Channel Symbols, Symbol Meaning

Operation

Displaying DS0 Channel Assignments

Use the Display command (in the Channel Configuration branch) to view how the DS0 channels are currently allocated.

Line 1 of the display shows the 31 channels of the

selected interface. Pressing or scrolls the next three channels onto the LCD. Line 2 displays what is allocated to the DS0 channel listed in Line 1. Symbols used in the display are shown in Table 3-5.

		Table 3-5
	Display Channel Symbols
Symbol		Meaning
±		The DS0 channel is not allocated.
Prtn		The DS0 channel is allocated to Port n,
		where n is 1, 2, 3, or 4.
Nn		The DS0 channel is allocated to the
		Network E1 interface DS0 channel n,
		where n can be any number from 1
		through 31.
Dn		The DS0 channel is allocated to the DTE
		Drop/Insert interface DS0 channel n,
		where n can be any number from 1
		through 31.

To display the DS0 channel allocation,

1.Press F3 to select Cnfig from the top-level menu screen.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Press F1 to select Edit.

4.Press the key from the Edit screen to display the Chan selection.

5. Select Chan.

Edit:

Port NET Chan

F1 F2 F3

6.From the Channel Config screen, select Dsply (display).

Channel Config:

Dsply Clear DTE

F1 F2 F3

7.From the Display Chan screen, select NET to display the channels allocated to the Network E1 interface.

Display Chan:

NET DTE Ports

F1 F2 F3

Or, select DTE to display the channels allocated to the DTE Drop/Insert interface.

NOTE

DTE does not appear when the DTE Drop/Insert interface is disabled.

Display Chan:

NET DTE Ports

F1 F2 F3

3170-A2-GB20-20 December 1996 3-27