Sony PT-47WX53 Set Up, Main and Split Blocking Message, PIP Blocking Message, Converge Procedure

ENGLISH

ICON MENUS OPERATION

LOCK (cont.)

Main and Split Blocking Message

If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all locks and rating blocks are disabled until the PTV is turned off or until all settings are off.

Note: If you enter your four-digit secret code to override rating blocks, you must reset all rating blocks by either reprogramming or turning the PTV off.

Main Picture Split Picture

PIP Blocking Message

PIP function is available when V-chip feature is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will disappear and a blocking message will appear on screen.

Note: If the V-chip feature is activated while PIP is on, PIP will immediately disappear. Enable PIP functions by setting V-CHIP ratings to OFF.

SET UP

rWhile the desired sub menu is highlighted, press VOL u to select or activate feature.

rIDIOMA/LANGUE - Select to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French).

rANTENNA - To select either ANT1 or ANT2.

rCC ON MUTE - Activates the onscreen Closed Caption feature when the MUTE button on the remote control is pressed. To deactivate press MUTE button again.

rCC MODE - This television contains a built-in decoder

that displays CC (Closed Captioned) text across the screen (white or colored letters on black background). It allows the viewer to read the dialogue of a television program or other information. The program viewed must include Closed Captioning for the feature to work. Activate the onscreen Closed Caption feature by selecting one of the following modes

Note: Closed Captioning does not function when the Picture Aspect ratio is set to zoom, To properly display Closed Caption, choose an aspect ratio other than Zoom.

•OFF - When Closed Caption is not desired.

•C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It does not block relevant parts of the picture). Text may be in any language.

•C2 to C4 - For other modes of video related information.

•T1 to T4 - For program guide and other information to be displayed, when available. (Blocks a large portion of the picture on the television screen).

Note: C1 mode is recommended for viewing Closed Caption.

rCONVERGE

Note: Only use the remote control buttons while adjusting convergence. The front control panel navigation and Action buttons have no effect.

Note: Convergence seldom needs adjusting except after moving the PTV or to make minor adjustments.

Procedure

•Press VOL u to enter converge sub-menu field.

• Press CH p or CH q to select:

•CONVERGENCE ADJ. - Select to correct minor convergence problem.

Note: After selecting press VOL u to continue

CONVERGENCE ADJ.

•RESET TO DEFAULT - Select to set convergence to factory default setting.

26•