Location and Function of ControlsFront/Left SideRear/Right Side/Bottom
aHandlebZoom ring

Adjusts the picture size.

cControl panel

For details, see “Control Panel” on page 12.

dConnector panel

For details, see “Connector Panel” on page 13.

eAC IN socket

Connects the supplied AC power cord.

fFront remote control detectorgLens

Remove the lens cap before projection.

hVentilation holes (exhaust)iFocus ring

Adjusts the picture focus.

jRear remote control detectorkIndicators

•LAMP/COVER: Lights up or flashes under the following conditions:

–Lights up when the lamp has reached the end of its life or becomes a high temperature.

–Flashes when the lamp cover or air filter cover is not secured firmly.

•TEMP (Temperature)/FAN: Lights up or flashes under the following conditions:

–Lights up when temperature inside the projector becomes unusually high.

–Flashes when the fan is broken.

For details on the LAMP/COVER and the TEMP/FAN indicators, see on page 43.

•POWER SAVING: Lights up when the projector is in power saving mode. When POWER SAVING in the SET SETTING menu is set to ON, the projector goes into power saving mode if no signal is input for 10 minutes.

GB 10 Location and Function of Controls