Next, the screen for entering the new password is displayed. (Enter the password at this screen even if you want to keep the current password.)

Enter password key

Use:

Cancel: Other key

3 Enter the password again to confirm.

If the password is entered incorrectly, the menu screen displays an “Invalid Password” message.

INSTALL SETTING

X Input A

V Keystone:

0

Imag e Flip:

Off

Background:

Blue

Lamp Mode:

Standard

Direct Power On: Off

High Altitude Mode: Off

Securit y Lock: Off

Invalid Password!

4 The security lock is completed.5 Turn the main power off and disconnect the AC power cord.

The security lock is set to on, then it becomes effective. The screen for entering the password is displayed when the power is turned on the next time.

Notes

•You will not be able to use the projector if you forget your password and the password administrator is not available. Be please aware that using the security lock can prevent valid usage in such cases. It is recommended that you make a note of the selected password.

•Once the security lock is set and the main power is turned off, the screen for entering the password is displayed when the power is turned on the next time. Enter the password that was set. If you fail to enter the correct password after three tries, the projector cannot be used. In this case, press the I / 1 key to turn off the power.

•The security lock will not be set if the correct password is not entered in steps 2 and 3, or a key other than the MENU, arrow keys, and ENTER key is pressed.

•If you call the customer service center because you have forgotten the password, you will need to be able to verify the projector’s serial number and your identity. (This process may differ in other countries.) Once your identity has been confirmed, we will provide you with the password.

Projecting and Up Setting

Projecting 27 GB