To input from

Press INPUT to display

 

 

Video equipment connected to the S VIDEO input

S VIDEO

connector

 

 

 

Smart APA (Auto Pixel Alignment) adjusts the picture of the connected equipment so that it is projected clearly.

Notes

If “Auto Input Search” is set to “On”, the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found.

For details, see “Auto Input Search” in the SET SETTING menu on page 35.

The smart APA is effective for the input signal from a computer only.

When the projector is connected to a notebook or a computer with a built-in LCD screen, you may have to switch the computer to output to the projector by

pressing Fn key and Fx key (such as LCD / VGA .)

F7 or Fx

Fn

5 Turn the zoom ring to adjust the size of the picture.6 Turn the focus ring to adjust the focus.AttentionLooking into the lens when projecting may cause injury to your eyes.To adjust the volume

The volume can be adjusted in the on-screen menu. See “Volume” in the PICTURE SETTING menu on page 33.

To mute the picture

Press the PIC MUTING key on the Remote Commander. Press again to restore the picture.

Projecting and Up Setting

Projecting 25 GB