Playing an MD (continued)

To check the MD information

Press the DISPLAY button repeatedly to check the MD information on the remote display. If the information, such as the track name, is longer than the display, the letters scroll from right to left.

When “Power Mode” is set to “Power Save” (page 31), the information is displayed only for several seconds by pressing the DISPLAY button.

MD information on the display

Track number/Elapsed time

Track number/Track name

The number of total tracks in the group /Group name 1)

The number of total tracks/Disc name

Track number/Group name (upper line) /Track name (lower line) 2)

Track number/Sound mode

Track number/Recording mode (SP2/LP2/LP4/MONO) 3)

Locking the controls – HOLD

In order to prevent accidental button presses while carrying the player, you can lock the controls (HOLD) for the remote and the player separately.

For example, you can operate the player by using the remote even if the HOLD function on the player is activated.

To lock the controls on the player

1Open the lid following the steps in “To open the lid” (page 18).

2Slide the HOLD switch, located inside on left side of the player toward . The controls on the player are disabled.

HOLD switch

To unlock the controls, slide the HOLD switch in the opposite direction of .

To lock the controls on the remote

Slide the HOLD switch on the remote toward

, so that yellow shows on the right end. The controls on the remote are disabled.

HOLD switch

1)The display appears only for an MD with group settings.

2)The track name appears on the upper line for an MD with no group setting.

3)The display appears only during playback and changes automatically to the display of the track number and the elapsed time after a while.

To unlock the controls, slide the HOLD switch in the opposite direction of .

20