Sony Q017-MD1 Troubleshooting

Troubleshooting

If you experience a problem with your player, try the following solutions.

1

2

3

4

5

Read through the symptoms and solutions on pages 38 to 40 to check your player.

Detach the remote and the headphones from the player, and then reattach them and operate the player.

Set the BUILT-IN BATTERY switch to OFF and let the player sit for about 30 seconds. Then set the BUILT-IN BATTERY switch to ON again and operate the player.

Unplug the AC power adaptor from the battery charging stand and the wall outlet. Then plug them in again and operate the player.

If the problem persists, contact QUALIA Concierge.

QUALIA Concierge Toll-free number:

1 (877) QUALIA3

Symptom	Cause/Solution
The built-in rechargeable	• The battery is charged when shipped. Check the remaining power of
battery does not charge.	the built-in rechargeable battery (page 16).
	• When “CannotCHG” appears, the room temperature is too high or too
	low. Charge the battery at a temperature of 0°C (+32°F)
	to +40°C (+104°F).
	• When recharging is started after using up the built-in rechargeable
	battery, it may take up to one minute for the operation lamp on the
	player or display indication on the remote to go on.
	• Firmly insert the plug of the AC power adaptor into the jack at the
	bottom of the battery charging stand.
The operation lamp on the	• Open the lid of the player and set the BUILT-IN BATTERY switch
player does not light up even	located inside the right side of the player to ON.
when the player is placed on
the battery charging stand.

38

Contents

Page Owner’s Record WARNING Caution Information Product registration RECYCLING LITHIUM-IONBATTERIES Caution: On this manual IMPORTANT SAFEGUARDS INSTALLATION USE SERVICE Page Contents Overview Getting Started Playback Playing an MD Settings Changing the settings Menu option Additional Information Caring for the player Identifying parts and controls Player Player (when lid is open) Remote Control (Remote) Remote display Supplied accessories Charging the battery To connect the AC power adaptor to the battery charging stand To check the charging status Checking the battery’s remaining power Adjusting the headphones to fit your ears To replace the earbuds To use the headphone adaptor Playing an MD To open the lid To stop playback To pause playback To check the MD information Locking the controls – HOLD To lock the controls on the player To lock the controls on the remote Changing the playback operations Changing the play mode – P-MODE Play mode list To listen to selected tracks only – Bookmark track play To listen to tracks in the desired order – Program play To play tracks repeatedly – Repeat play To listen to tracks using the group function About group settings Operation lamp for the group settings Selecting the sound mode – V-SUR/SOUND Sound mode settings To customize the sound – Custom Changing the settings Menu option “Useful” menu “Option” menu Power Mode This setting determines battery use Normal During playback, the operation lamp on the player and the remote display always light up Caring for the player For the player and the remote For the earbuds For the supplied carrying case When the player is not used for three months or more Precautions On safety On the AC power adaptor (for the supplied battery charging stand) On charging On handling On heat build-up On mechanical noise On installation On disposing of the player Page On the remote On the MD cartridge On the headphones On cleaning On the carrying case Troubleshooting SymptomCause/Solution The player does not work or works poorly • Insert an MD if “NO DISC” is displayed • End the setting operation using the remote if “MENU” is displayed Troubleshooting (continued) Specifications Index Symbol/Number