Speco Technologies 8TH Sequence Setup, Main / Call Monitor Dwell, Main / Call Monitor Schedule

User’s Manual

5.5Sequence Setup

The Sequence Setup menu allows the user to set the camera sequence schedule and dwell time for main and call monitor. Select <Sequence Setup> in Main menu and press ENTER; the menu displays as follows. Items in the Sequence Setup menu are described in the following subsections.

Sequence Setup
Main Monitor Dwell	5 Sec
Main Monitor Schedule
Call Monitor Dwell	5 Sec
Call Monitor Schedule

5.5.1Main / Call Monitor Dwell

The Main / Call Monitor can be set to display full screen video for all installed cameras in sequence. This item is used to set the Main / Call Monitor dwell time, which is the amount of time elapsed between switching images. The dwell time has an available range of 1 to 120 seconds.

5.5.2Main / Call Monitor Schedule

This item is used to set the Main / Call Monitor camera sequence in full screen format. Move the cursor to <Main Monitor Schedule> and press ENTER; the menu is displayed as follows.

Main Monitor Schedule

01►02►03►04►05►06►07►08► 09►10►11►12►13►14►15►16

01020304050607080910111213141516 Back OK Cancel

Follow these steps to set a sequence:

•Press LEFT direction key to delete the original setting.

•Press the desired Channel keys to assign a camera to that location in the sequence.

•Continue the steps until the sequence is completed.

A sequence can have up to 16 entries. The user can select fewer than 16 entries for a camera sequence and leave the remaining entries blank. The sequence can include a specific camera or cameras multiple times.

DVR-4TH/8TH/16TH Series	107
SPECO TECHNOLOGIES 07/10