Speco Technologies 4TH, 8TH, 16TH user manual Record Setup, Record Mode Setup, Record Resolution

User’s Manual

5.4Record Setup

The following three factors will effect the total record time of the DVR-4TH/ 8TH/ 16TH series unit:

•HDD capacity

•Recording rate (Picture per Second)

•Image quality settings

The greater the recording rate and the higher the quality setting, the shorter the recording time. Most of the related factors can be set here in this submenu.

The Record Setup menu allows user to set recording quality, recording schedules, and other recording parameters. The account with appropriate privilege is required to access Record Setup menu. In the Main menu, move the cursor to <Record Setup> and press ENTER. The following menu is displayed.

	Record Setup
Record Mode Setup
Schedule Setup	Best Quality
Preset Config
Per Camera Config
ezRecord Setup
Data Lifetime Setup	15 Sec
Pre-Alarm Recording
Circular Recording	On
Audio Recording	On
Purge Data

5.4.1Record Mode Setup

The Record Mode Setup menu is for selecting resolution and recording format. The relative record settings, such as preset configuration, will follow the record mode setting. The menu displayed as the following.

Record Mode Setup
Record Resolution	352*240
Record Format	H264
Max Rec. PPS	60

5.4.1.1Record Resolution

Select resolution of the recorded video. If the recording is set to NTSC system, the selections are 720*480, 720*240, and 352*240. If the recording is set to PAL system, the selections are 720*576, 720*288, and 352*288.

DVR-4TH/8TH/16TH Series	99
SPECO TECHNOLOGIES 07/10