Speco Technologies 4TH Dome Controlling Key, Enter / Auto, Set / Go Preset, Toggle Hint Screen

User’s Manual

The default RS-485 settings of the DVR-4TH/ 8TH/ 16TH series unit are 9600 Baud, 8 Data Bits, 1 Stop Bit, and No Parity.

NOTE: The settings only become effective after saving the changes and exiting from the menu.

4.6.4Dome Controlling Key

The function keys used for Dome Control are illustrated below.

Enter / Auto

•In OSD setup menu, press this key to make selection.

•In dome control mode, press this key to activate automatic adjustment of focus and iris.

Set / Go Preset

This key is used to enter the Dome Preset menu to enable the set up of a specific position as a preset and to go to the predetermined preset positions.

Toggle Hint Screen

This function is used to avoid showing the dome parameter information while controlling the dome camera. Press this key to hide the information. Press the key again to recover it.

Pan / Tilt

•In OSD setup menu, these keys function as direction keys.

•In dome control mode, press these keys to pan and tilt the lens of dome camera.

ESC

Press this key to leave dome control mode and return to live mode.

54	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10