Speco Technologies 16TH, 8TH, 4TH Trigger Port, Dial-out Idle Time, Dial-out Max Time, Connect

User’s Manual

Dial-out Idle Time

This item indicates the longest amount of time that the modem connection remains active if there is no acknowledgement from the remote pc. The value can be set from 1 min to 600 min. If selecting <0>, the modem connection keeps active continuously.

Dial-out Max Time

This item indicates the longest amount of time that the connection via modem remains active. The value can be set from 1 min to 600 min, or <0> to keep the connection indefinitely.

Connect

When the Dial-out related settings are configured, set this item to <YES> to starting dial-out or select <NO> to disconnect.

Dial Port Selection

The Dial Port Selection enables users to assign the Dial-In/Out or Text to the designated port of the DVR. For instance, when the cable of a modem is inserted to the Serial Port of the DVR, enter the Dial Port Selection menu and assign Dial-In/Out to the Serial Port, the DVR-4TH/ 8TH/ 16TH series unit will now be able to use the modem to connect to the internet.

Dial Port Selection
Serial Port	Dial-In/Out
USB Port-Front	NONE
USB Port-Rear Top	NONE
USB Port-Rear Bottom	NONE

5.1.7.4Trigger Port

To avoid the possibility of the default service port (port 100)being blocked, this item enables the user to change port 100 into another port. To change the trigger port, move the cursor over <Trigger Port> and press ENTER, then adjust the setting by UP / DOWN keys. After you have entered a different port and pressed ENTER, a message “Network restarting Please stand by” will be shown on the screen. A message box will be displayed in approximately 30 seconds.

Port allocated………………….……√

UPnP NAT setting…………….……X

DDNS submitted……………………√

WAN connection……………………X

DVR-4TH/8TH/16TH Series	79
SPECO TECHNOLOGIES 07/10